

Valves: Santoprene®
Diaphragm: Santoprene ®
Maximum pressure: 2.1 BAR - 30 PSI
Maximum flow rate: 10.6 L/min - 2.3 GPM
Port size: 1/2" male
Available in batch of 6: €127.08 excl. tax / unit - please contact us
Self-priming up to 3.7 m
Chemical resistant materials
Dry operation without damage
Automatic pressure switch
Integrated check valve (different depending on the model) prevents liquid from returning to the solution tank
Uninterrupted operation of the motor on the version with fin cooling
Are you mobile whether in a camper van, caravan, boat or you want to convert your van? It is necessary to have a water supply; for an independent sink, a shower or any other water supply.
We have the solution! The Shurflo pump series 2088-573-143, it is ideal for any mobile system but it is also for autonomous systems! It stands out for its reliability and performance on high flow and moderate pressure applications.
The Shurflo 12V water pump can be installed on motorhomes, caravans, converted vans, recreational vehicles or boats for the supply of sanitary water. It can be powered by a battery or directly by photovoltaic panels placed on the vehicle.
Very quiet and self-priming, it can run dry without any damage.
Capable of pumping up to 13 liters per minute or holding a pressure of 3.4 bars maximum, you will be able to supply your shower or your tap.
The 12V water pump has a pressure limiter, which allows the pump to automatically stop as soon as the downstream circuit is closed.
This pump weighing only 2 kg and measuring only 22 cm in length, 13 cm in width and 12 cm in height will fit anywhere in your water installation.
Composed of polypropylene (plastic), a valve and a diaphragm in santoprene, it is able to resist many chemicals.
In addition, its integrated non-return valve prevents the return of liquid into the solution tank and thus does not mix used water or products with clean ones.
For optimal operation of the pump, it is essential to fully open the taps so that the minimum flow rate is reached. If the flow rate is too low, the speed is jerky and can cause the pressure switch to be destroyed.
You can also save water and use a lower flow rate, it is recommended to use a pressurized buffer tank.
Finally, this pump is not only used for moving parts, it is widely used for different types of spraying including direct, multi-nozzle and soil fertilization requiring a flow rate of up to 13.6 l / min, the water pumps in the series are available in different materials to resist chemicals.
The unique conical shape of the valves allows for high flow rates at maximum discharge pressures. Ideal for sprayers used on the farm or on the farm.
Equivalent to the 2095 12 Volt Shurflo pump
You might also like