SHURflo pump 2087-593-135 12V
Shurflo® 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spraying and transfer applications that require flows of up to 4.0 GPM [14.4 l/min].
- Self-Priming up to 12 Vertical Feet [3.7M]
- Chemically Resistant Materials
- Automatic Demand
- Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid
- Supported for agriculture
SPECIFICATIONS
- 12 V DC
- 45 psi
- OPEN FLOW GPM 3
- Control type : Switch
- AMPS (MAX) : 5
- PORTS : 1/2"-14 NPSM
- Housing material : Polypropylene
- Valve material : Viton
- Diaphragm material : Santoprene
- CAM : 3
- Motor finish : Zinc
- Motor wiring : 16 AWG wires w/SW
Characteristic of SHURFLO water pumps with automatic pressure switch series 2087 12 Volts d.c. with electric pack
-
Self-priming up to 3.7m
-
Chemical resistant materials
-
No-load operation without deterioration
-
Integrated on/off switch protected from the weather by a translucent bellows
-
2-pin connector on power cables
These models feature the most aesthetically pleasing molded assembly and manual rocker switch with international on/off symbols.
The wiring, neatly routed in the molded assembly through suitable holes, is fitted with a strain relief clamp inside the housing.
Distinctive, tapered valve design allows for high flow rates at maximum discharge pressures, making the 8000 Series the pump of choice for sprayers used on the farm or on the farm.
Powered by 12 Volts DC, these pumps deliver up to 11.35 L/min to give optimum performance in a wide variety of applications.