Shurflo Pump 2088-443-144

€180.87
Tax excluded

SHURFLO Automatic Pressure Switch Water Pump 2088 Series 12 Volt DC

IDEAL FOR CARAVAN OR MOTORHOME AND OTHER DOMESTIC USE

Viton® Valves

Santoprene® Diaphragm

Maximum Pressure: 3.1 BAR - 45 PSI

Maximum Flow Rate: 13.2 L/min - 2.8 GPM

Port Size: 1/2" MSPT Male

0 in stock

Purchasable in packs of 6: €150.72 excl. VAT / unit - please contact us

Quantity

Feature of SHURFLO 2088 Series 12 Volt DC Automatic Pressure Switch Water Pumps

  • Self-priming up to 3.7m

  • Chemical resistant materials

  • No-load operation without damage

  • Automatic pressure switch

  • Integrated non-return valve (different depending on the model) preventing the return of the liquid into the solution tank

  • Uninterrupted motor operation on fin-cooled version

Are you mobile whether in a motorhome, in a caravan, in a boat or you want to fit out your van? It is necessary to have a water supply; for an independent sink, a shower or any other water supply.

We have the solution! The Shurflo Pump Series 2088-443-144, it is ideal for any mobile system but it is also for stand-alone systems! It stands out for its reliability and performance on high flow and moderate pressure applications.

The Shurflo 12V Water Pump can be installed on motorhomes, caravans, camper vans, recreational vehicles or boats for the supply of sanitary water. It can be powered by a battery or directly by photovoltaic panels placed on the vehicle.

Very silent and self-priming, it can completely run dry without any deterioration.

Capable of pumping up to 13 liters per minute or maintaining a pressure of 3.4 bars maximum, you will be able to supply your shower or your tap.

The 12V water pump has a pressure limiter, which allows the pump to stop automatically when the downstream circuit is closed.

This pump weighs only 2 kg and measures only 22cm in length, 13cm in width and 12cm in height and will go anywhere in your water installation.

Made of polypropylene (plastic), a valve and a santoprene diaphragm, it is able to withstand many chemicals.

In addition, its integrated non-return valve prevents the liquid from returning to the solution tank and thus does not mix water or used products with clean ones.

For optimal operation of the pump, it is essential to fully open the taps so that the minimum flow rate is reached. If the flow is too low, the speed is jerky and can cause the destruction of the pressure switch.

You will also be able to save water and use a lower flow rate, it is recommended to use a pressurized buffer tank.

Finally, this pump is not only used for moving parts, widely used for different types of spraying including direct, multi-nozzle and ground fertilization requiring a flow rate of up to 13.6 l/min, water pumps of the series are available in different materials to resist chemicals.

The conical shape of the valves is unique and allows high flow rates to be achieved at maximum discharge pressures. Ideal for sprayers used on the farm or on the farm.

Equivalent to the 2095 12 Volt Shurflo pump

2088-443-144
New product

Download

fiche technique 2088-443-144

Download (570.89k)

You might also like